Get More Money From Your Makeshift Car Wash

 

You’ve seen it and you look at it all the time, just about every weekend when you drive around during the summer: someone is trying to boost funds by holding an auto wash on some street corner, or in some parking lot of a local fast food franchise or auto repair place. You wonder the way they could believe that this tired and over done idea is actually the best relocate to getting more funds for their organization. Alternatively, how they may feel good about exploiting the teenage or early-20’s girls inside their bikinis. It’s abhorrent! But a car wash can be a good plan, still, and there are ways of making sure that it can be. Here are some tips for you to make sure your car or truck wash raises the funds it requires.

1. Franchise the Car Wash

DisplayOutlet-FirstBatch-8-1

The worst thing you can do would be to hold it in one location. At the very least, you have to have the car wash on both sides of the street. The annoyance of having to change around and fight traffic is enough to deter them, even though there are going to be a lot of potential customers who would be willing to obtain their car washed for $5 on impulse. It may sound ridiculous and you could try to fight that idea, but you’re fighting against human nature, and human nature always wins. You never see car washes that are for both sides from the street, and that’s crazy. It seems like a terrific way to maximize the customers and therefore the earnings.

2. Just A Little Cheap Advertising Never Hurt Read the rest of this entry »

facebooktwittergoogle_plusby feather

Attracting the Lunchtime Crowd to your Delicatessen

 

In the fierce battle to attract customers to your restaurant, there are many do’s and many don’ts. You want people to want to come to your restaurant, you can’t force them to do it. So how can you attract first time customers to your new restaurant, or new customers to your older restaurant? The challenges are the same for both, and there are some strategies you must employ if you are not already. You can make the best sandwiches in town but if no one has them no one will ever appreciate them and then tell their friends. Here’s how to attract that coveted lunchtime crowd to your Deli, over the competition.

1. Encourage Social Media

DisplayOutlet-FirstBatch-12-1

In this day and age, social media is an absolute must. Everyone loves to brag about where they ate and how what they had for lunch was so good and what you had was so terrible. The picture of food, though annoying, can be great for your business. Offer incentives for people who post pictures of your food and tag you on Instagram. Something easy like a free drink or a bag of chips. Many people will want to share their food anyway, but a little bit of incentive will get those on the fence to tag you online. You never know if that person has 1000’s of local followers and that’s a pretty inexpensive way of getting your name out there. Read the rest of this entry »

facebooktwittergoogle_plusby feather

Important Caution Before Building Shop

shopShop house is a business investment that has a great chance, either for personal or for mass. In trade, the shop has a huge role to meet daily needs, because it is usually also used as a residence by the owner of the store or managers.

The architectural style of the shop usually follow its architectural style residential complex, classical-style residential complex if the shop was also a classic style, the main principles that should be very consider in building the shop is efficiency, both in terms of budget or land used, then from the shop on its general more than one floor, because it’s goal for efficiency between the trade and residential owners.

Planning to build shop houses must be considered very carefully, strived for economical and fast in the process. Footprint analysis is needed to determine the sale value of the location of the shop, so it can be seen from the comparison of some existing location, and then selected the best really.

Read the rest of this entry »

facebooktwittergoogle_plusby feather

Distinguishing Building Project Manager and Leader

projectIt has become common even becomes imperative when on a building construction project manager is always there. Because all kinds of work processes have to be under the command of this is held by the manager. And from this manager the smoothness or success of the project determined that although not an absolute factor. But clearly a bit much success in controlling manager and run the project also has contributed not a little.

Manager building a good project should certainly be able to present themselves not only as the incumbent ruling and to love the task to subordinates and his men as they pleased. But he should be able to perform as a leader or leaders who can create a good working system so that all employees will feel comfortable until builders were under his leadership.

There are some differences to become a manager and a leader or a good leader, but some are only limited to be manager without having a broad view. Examples such as these, narrow-minded managers who rely on the letter of appointment as the holder of the highest command in the building project.

Read the rest of this entry »

facebooktwittergoogle_plusby feather

New Heat Transfer Solutions Can Take Your Company To New Levels

 

Your innovative business style keeps you searching for the latest advancements in conventional oil and gas industry technologies to fully service your high tech equipment and manufacturing processes. Taking advantage of new heat transfer solutions and research projects that are currently developing new strategies and technologies will advance your company to new levels of efficiency and improved flexibility. Making sure that your company’s equipment is up to date and appropriate to the task allows your business to fully meet your manufacturing requirements as well as improving the environmental sustainability of your entire process.

Technology driven to higher powered components and improving efficiency of thermoelectric energy conversion will be utilized in new innovative power sources. One issue that needs to continually be addressed is the problem of inefficient heat flow. Heat is transferred at interfaces between various materials during this process and the ability to block or transfer the flow of this heat from one material to another dramatically effects equipment reliability and performance.

“The University of Toronto (U of T) reports that researchers, working with colleagues from Carnegie Mellon University, have published new insights on how materials transfer heat.” Results recently published in Nature Communications reveal that a new tool provides a clearer understanding of solutions for small electronic devices’ thermal conductivity issues. This study focuses on abilities to dissipate heat through nano-scale thermal activity and restructuring materials through lowering thermal conductivity. The Dean of U of T Engineering, Professor Amon, said, “These new insights will allow researchers to design nanostructured thermoelectric materials with increased efficiency in converting waste heat into electrical energy.” Another scientific research team will be investigating an exciting new approach to the management of heat transfer for manufacturing applications in oil and gas industries. Nine engineers and scientists are working together to develop a process, using nanotechnology, that will re-engineer material surfaces for the regulation of heat flow. The special X-ray technique uses ultrafast lasers to allow scientists to observe vibrating atoms as they carry heat energy across material interfaces to accelerate the new process and transition it into heat flow applications.

Another breakthrough destined to change the approach of manufacturing metal materials promises to produce heat exchangers with exceptional mechanical structure. A high-speed metal printing process (MMP), equivalent to 3D LED or laser printers, will incorporate powdered metals and powdered ceramics, layer after layer, to fabricate unique microstructures and combinations of materials that will form 3D objects of functionally graded new metal products. Limitless applications will be available when this technology produces any form of solid metal, three-dimensional equipment parts created from powdered metallurgy. Heat and pressure-formed machinery parts are fabricated on “3D laser printers” with charged pattern photoreceptors using an electrostatic field to enhance and strengthen parts for any machinery such as: self-cleaning heat exchangers, shell and tube heat exchangers and plate fin heat exchangers. This technology will advance product corrosion resistance, superior heat/cold resistance and custom designed qualities for specific processes using any type material combinations. Read the rest of this entry »

facebooktwittergoogle_plusby feather